Inhaltsverzeichnis

Unreal Tournament 2004

Info

Multiplayer Information

  • Internet play: yes
  • LAN play: yes
  • Lobby search: yes
  • Direct IP: yes
  • Play via Gameranger: no
  • Coop: yes
  • Singleplayer campaign: yes
  • Hotseat: no

UT 2004 was development by Epic Games and released first on 18.3.2004. It game relatively soon after Unreal Tournament 2003 and is mostly the same game, with changed movement and some more features. It is still actively played today, on many internet servers.

Purchasing

It is still available at GOG and Steam, unless you are shopping from a German IP. For being part of a the LoMHtYP the game is not even displayed in the search results in Germany.

The GOG version already includes the latest patch.

Installation

You should plan a few minutes for the installation. Even from SSD with a reasonably up-to-date PC it takes a while. On older computers from DVD to disk it can take up to 45 minutes…

After installing, you should install the UT 2004 patch and the bonus pack. Then you have at least the standard maps. But since not everyone has the same understanding of »standard« maps, there is also a map pack that you can unpack with 7 Zip. The maps belong to \UT2004\Maps. With the Unreal Anthology installation this is in an extra directory. For those of you who didn't install the game from the Anthology DVD, but maybe have it from the UT 2004 DVD, it might also need the crack. Then you can avoid the DVD while playing. Without a valid CD-Key nothing works anyways. UT2000 is also available at gog.com. But not anymore from IPs in Germany.

Game Modes

Movement Combos

Certain key stroke combinations lead to a combo move. The timing is critical for them. In general it means pressing the keys in fast succession. The following combos should work any time you are walking:

Combo Effect
Jumps to the left.
Jumps to the right
Jumps forward
Jumps backwards
combo Space At the maximum height of the first combo jump, press Space again and the character gains some additional jumping height. This also works with normal jumping (Space). This also works in low gravity, but the timing is different then.

Adrenalin Combos

Whenever you do an achievement of some kind (fragging, multi-kill announcement, winning a capture, etc.) or collect an adrenalin pill, your adrenalin level is increased a bit (the amount depends on the reason for it). When you have collected enough adrenalin (shown in the right upper corner) and reach value 100, you cannot collect any more, until you use a adrenalin movement combo to release the adrenalin. The following four movement combos activate an adrenalin effect:

Movement Effect
Speedup, all actions are accelerated for a short period of time.
Health and armor gain over time (until adrenalin runs out, gaining additional adrenalin during that time prolongs the effect).
Cloak, turns you invisible for a short period of time.
Berserk, similar to the Double Damage item the damage dealt is increased for a short period of time.

Cheats

There is a number of cheats, that can be enabled on demand. By default the following should work, to activate cheats until you stop playing on a certain server:

The key Tab may depend on your configuration. Use the key that binds the function Type. (Default setting in your user.ini would be written as Tab=Type below the section [Engine.Input].)

Once the cheats are active, you can use the following cheat codes:

Code Effect
god You are now invincible.
allweapons Gives you all possible weapons, but the ammo is the starting amount.
loaded Gives you all possible weapons, fully equipped with ammo.
allammo Gives you 100 % of ammo for all weapons.
fly Makes you fly. Note: You can control your altitude only with directing your cross hair up or down and move forwards/backwards.
walk Makes you walk normally again.
ghost No-clipping-mode: You fly and the map geometry is no obstacle any longer (going through walls, floors and ceilings).
behindview x Turns third person view on or off (x = 1/0)
teleport Transports you to the place your crosshair is at right now.
setspeed x Sets the movement speed to value x, default is 1.
setjumpz x Sets the maximum height of a jump to value x. Default is 300.
setgravity x Sets the strength of the gravity to value x. Note: Only negative numbers actually give you a normal gravity direction. Standard is somewhere around -1000.
fov x Sets the field of vision angle to value x, default is 90 (degrees).
setname x Sets the player's name to text x. This is particularly valuable in single player, to change the name of the profile player. Note: This does not permanently alter the name.
suicide Kills yourself.
addbots x Adds a number of x bots to the match.
killbots Removes all bots from the match.
playersonly Freezes the game, including bots and projectiles already in motion. Only the player can move and pick up items. All elements keep their effects, e. g. rockets or Flak cannon shells do damage and vanish, when you touch them. Enter again to continue the match.
switchteam Switches the player to the other team, given the current match is a team mode.
stat fps Shows the current and average FPS in the right upper corner of the screen.
stat game Shows some game statistics on the left hand side of the screen.
stat audio Shows some audio statistics on the left hand side of the screen.
stat net Shows some network statistics on the left hand side of the screen.
stat all Shows all statistics on the screen.
stat none Hides all currently displayed statistics.
slomo x Turns slow/accelerated motion on. Value x defines the ratio. 1 is normal, 0.1 is one tenth of normal speed, 10 is ten times of normal speed.
setres axbxc Sets the resolution of the game to values a (x-res), b (y-res) and c (bits color depth). Only use values that are supported by your hardware.
togglefullscreen Turns on/off full screen mode.
quit Exits the currently running match.
exit Exits UT 2004 altogether.
open x Loads the map given by x. See section Map Names below for further information.
spawn x Spawns an object of given type x. See section Spawn Names below for a list of available values.

Map Names

For the open cheat code the technical names of the maps have to be used. For the standard maps the names are as following:

Tutorials

Assault

Bombing Run

Capture the Flag

Deathmatch 1 on 1

Deathmatch

Domination

Onslaught

Other Levels

Spawn Names

For the spawn command you have to enter the desired items by using their technical names. Here the items names:

Weapons

These values work on every map:

Value Weapon
xweapons.assaultriflepickup Assault Rifle
onslaught.onsavrilpickup Avril
xweapons.bioriflepickup Bio Rifle
xweapons.flakcannonpickup Flak Cannon
onslaught.onsgrenadepickup Grenade Launcher
xweapons.supershockriflepickup Instant Kill Shock Rifle
xweapons.painterpickup Ion Painter
xweapons.sniperriflepickup Lightning Gun
xweapons.linkgunpickup Link Gun
onslaught.onsminelayerpickup Mine Layer
xweapons.minigunpickup Mini Gun
xweapons.redeemerpickup Redeemer
xweapons.rocketlauncherpickup Rocket Launcher
xweapons.shieldgunpickup Shield Gun
xweapons.shockriflepickup Shock Rifle
utclassic.classicsniperriflepickup Sniper Rifle

Onslaught Vehicles

These values only work on Onslaught maps.

Code Vehicle
onslaught.onshovertank Goliath
onslaught.onsprv Hellbender
onslaught.onshoverbike Manta
onslaught.onsattackcraft Raptor
onslaught.onsrv Scorpion
summon onslaughtfull.onsmobileassaultstation Leviathan
onslaughtfull.onsbomber Phoenix
onslaughtfull.onsgenericsd TC-1200 (toilet)

Bonus Models

There are some models/characters that are not available by default. You can activate them manually by editing file System\User.ini in your UT 2004 installation. Look for text TotalUnlockedCharacters and alter it to the following:

TotalUnlockedCharacters=Malcolm;ClanLord;Xan

You will now have all bonus characters available.

Game File Types

UT is a highly moddable game, whose files can be altered and supplemented. Here is a list of file types/extensions, that UT knows:

Extension Content Folder Location
det German Translation System
est Spanish Translation System
frt French Translation System
int International Translation System
itt Italian Translation System
ka Karma KarmaData
kot Korean Translation System
u Skripts System
uax Sounds Sounds
ucl Unreal Cache List System
ukx (Vehicle) Animation \ (base folder) and Animations
usx (Vehicle) Static Mesh StaticMeshes
ut2 Maps Maps
utx Textures Textures
uvm Saved Singleplayer Game Saves
uz2 Compressed File See below

The uz2 extension usually comes with another one preceded, such as my_map.ut2.uz2. This indicates the actual file contents. Files of this kind can be manually decompressed by using the System\UCC.exe (Windows) resp. System/ucc-bin (Linux) in this fashion:

ucc decompress file_name

The resulting file will be placed inside the source folder of the decompressed file (Windows), resp. ~/.ut2004 (Linux). The opposite is of course also possible:

ucc compress file_name.

Network/Internet Server

Replacement Master Servers

As Epic stopped supporting UT99 and UT2004 in 2023, the official master servers of both games are down. However, there are replacement servers maintained by communities. One of them is the 333 Network. In order to use those, you should do the following steps.

  1. If the game or game servers are still running, stop their processes (e.g. close the game).
  2. Find the file System\UT2004.ini and make a backup of it.
  3. Open the original file in a text editor.
  4. Look for a row containing [IpDrv.MasterServerLink].
  5. Below it you will find lines defining the original server addresses, such as MasterServerList=(Address=“ut2004master.epicgames.com”,Port=28902). Delete those lines.
  6. Replace the deleted lines with the following lines:
    • MasterServerList=(Address=“ut2004master.333networks.com”,Port=28902) and
    • MasterServerList=(Address=“ut2004master.errorist.eu”,Port=28902)
  7. Restart your server or start the game. You should be good to go now. When viewing the News tab of the in-game server browser, you should see a message, confirming you are using the 333 Networks master server.

Note: For load balancing reasons UT2004 only uses one of these entries at a time, at will. 333 Networks and errorist synchronize their known records. So you will always receive all servers.

(Source)

Basic Settings

Ports 7777 and 7778 (UDP) must be forwarded for a UT 2004 server (Cvar Port in section [URL] of your ini-file for the server). As with UT 1, port 7777 takes playing connections and 7778 waits for query requests (game state). The second port is selected automatically in relation to the first one. The query port is always + 1 of the connection port. So a fully functional UT 2004 server always requires at least two directly adjacent UDP ports to be forwarded, to make it reachable directly via the Internet.

If you are using the server via LAN (too), port 10777 (UDP) must also be accessible from the clients (cvar LANServerPort in section [IpDrv.MasterServerLink]) and the clients must be able to open Port 11777 (UDP) on their end for querying the server (cvar LANPort in section [IpDrv.MasterServerLink]).

When using the web admin page, an additional TCP port might be required to be forwarded, as is set in cvar ListenPort in section [UWeb.WebServer]. 80 is the default value. It does not facilitate SSL encryption. So when making it available via internet, make sure to use a reverse proxy or similar technology to make an SSL connection possible! Otherwise your admin credentials are being send openly via the net, visible for anyone eavesdropping.

Do not use UT Stats

When starting a server, you should set your game stats value to false (?gamestats=false). Also set SendStats=False in section [IpDrv.MasterServerUplink] in your ini file. Since 4th of December 2018 the stats servers are permanently down. So it does not make any sense to require players to use the stats feature with a pseudo account.

(Source)

Windows Firewall Notification

It might occur, that UT 2004 reports that it cannot connect to other computers because the UT2004 executable is not cleared in the Windows firewall, even when this is not true. This also happens when actually not using the Windows firewall at all (e.g. using a third party firewall). There is a way around this problem:

[FireWall]
IgnoreSP2=1

After restarting UT2004 you should be good to go.

(Source)

Mobile Infanterie

The Mobile Infanterie server is available on the standard port: www.mobile-infanterie.de:7777. It should also appear on the masterservers. But in order to find it, you would have to know the current game type being played. In order to find that, have a look at https://www.mobile-infanterie.de/status.php.

Downloads

See also

Back to the games database